Publications

 

 

 

Books on Mechanochemistry

1. Avvakumov E.G. “Mechanical methods for activation of chemical processes”. Novosibirsk, “Nauka” publishing house. 1986. P. 305. (In Russian)

2. Boldyrev V.V. “Experimental methods in mechanochemistry of solid inorganic substances”. Novosibirsk, “Nauka” publishing house. 1983. P. 64. (In Russian)

3. Molchanov V.I., Yusupov T.S. “Physical and chemical properties of dispersed minerals”. Moscow. “Nedra”. 1981. P. 201. (In Russian)

4. M. V. Chaikina, Mechanochemistry of Natural and Synthetic Apatites [in Russian], Novosibirsk, Izd-vo SO RAN, 2002, p. 218. 4. (In Russian)

5. G. Heinecke, Tribochemistry. Akademie-Verlag, Berlin, 1984.

Publications of the Company Employees and of the Partners

6. Lapshin V.I., Yarmarkin V.K., Fokina E.L. “Mechanical activation of synthesis and sintering of multicomponent oxide”. Sintering 89, Seventh world round table conference on sintering, 1989, Herceg-Novi, Yugoslavia.

7. Lapshin V.I., Yarmarkin V.K., Fokina E.L. “Kinetics and mechanisms of mechanochemical solid state sintering of complex oxides. Science of sintering.” /Ed. by D.P.Uskokovic, New York and London, 1989, 537-549.

8. Lapshin V.I., Yarmarkin V.K., Fokina E.L. “Regularities of mechanochemical synthesis of complex oxides. Mechanochemical synthesis in inorganic chemistry”, New York and London, 1994, 66-83.

9. Budim N.I., Lapshin V.I., Rubalskij G.D., Krasik I.N. 1991. Poroshkovaya Metallurgiya (Powder Metallurgy), 11, 96-99. (In Russian)

10. Streletskij A.N., Lapshin V.I., Fokina E.L. 1989. Kinetika I kataliz (Kinetics and Catalysis). 30, 1064–1069.

11. Kochnev V.G. Planetary Mill. Russian Federation Patent No 1358990 (1992).

12. Fokina E.L., Budim N.I., Chernik  G.G. “The method of applying metal coatings on particles and substrates”, RU 2149217.

13. Fokina E.L., Budim N.I., Kochnev V.G., Chernik G.G. 2004. Planetary mills of periodic and continuous action. J. Materials Sci., 39, 5217-5221.

15. G. Chernik , E. Fokina, N. Budim, M. Hueller, V. Kochnev. “Milling and Mechanical Alloying in Planetary Mills”. Nanoindustriya (Nano-Industry), No 5, 2007, pp. 32-35. (In Russian)

16. A. Tsetsekou, G. Chernik. Planetary milling for planetary goals. The Parliament Magazine, June 6, 2005.

17. M. Sopicka-Lizer, T. Pawlik, M. Tańcula, L. Pająk, G. Chernik and E. Fokina. Pressureless sintering of the nanostructured b-sialon precursor. Innovative Processing and Synthesis of Ceramics, Glasses and Composites. Materials Science and Technology (MS&T) 2006: PROCESSING pp. 507-516. Oct. 15-19, 2006. Cincinnati, Ohio, USA.

18. Sheverdyaev O.N., Bobrov A.P., Kornev A.E., Sheverdyaeva N.V., Chernik  G.G. “Producing and application of the shungite and termine superfine powders as mineral fillers for the rubber industry”. Kauchuk I rezina (Rubber and Vulcanised Rubber. 2006, No 6, pp.18-21. (In Russian)

19. G. Chernik. “From Destruction to Creation”. Innovatsii (Innovations), 11 (109), pp. 64-67, 2007. (In Russian)

20. The effect of sialon precursor nanostructurization in a planetary mill on the properties of sintered ceramics. M. Sopicka-Lizer, T. Pawlik, T. Włodek, M. Tańcula, G. Chernik. Key Engineering Materials, 352 (2007) pp 179-184.

21. Chernik G.G. “The Nano-technological Initiative of St-Petersburg State University”. The proceedings of the international theoretical and practical conference “Nanotechnologies for Industry - 2007” Fryazino, Moscow region.

22. M. Hueller, G.G. Chernik, E.L. Fokina, N. Budim. Mechanical alloying in planetary mills of high accelerations. Rev. Adv. Mater. Sci. 18 (2008) 366-374.

23. G. G. Chernik, E. L. Fokina, N. I. Budim, E. A. Vasilieva, V. G. Kochnev and M. Hueller Mechanical alloying in planetary mills of high accelerations. Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials, June 8–12, Washington, D.C.

 
Active-nano (Andrey V. Petrov)